fbpx
Sale!

RØDE Stereo VideoMic Camera-Mounted Stereo Microphone

$249.00$263.99

DISCONTINUED

SKU: RodeStereoVideoMic Category: Tags: , , , , , , , , , ,

Description

**THIS PRODUCT HAS BEEN DISCONTINUED**

 

The Stereo VideoMic by RØDE delivers true stereo X/Y recording in a compact, camera-mountable microphone. The Stereo VideoMic accurately captures stereo ambiance while exhibiting excellent off-axis rejection and signal-to-noise ratio. The small, lightweight profile allows quick and unobtrusive mounting on DV and HDV cameras without appearing in the frame.

The shock mount is attached to the microphone and a versatile shoe mount allows the entire microphone to be mounted to a hot shoe on a camcorder, boom pole, or stand. Replaceable rubber O-rings suspend the microphone on the shock mount and protect against noise due to movement and handling. A coiled cable terminates to a stereo TRS 1/8″ (3.5mm) mini output connection. The RØDE Stereo VideoMic is powered by a standard 9 Volt battery. The Stereo VideoMic is an excellent choice for weddings, Electronic News Gathering (ENG), interviews, and more.

Stereo X/Y Recording
The RØDE Stereo VideoMic features true X/Y stereo pick-up for accurate ambiance reproduction. Excellent off-axis rejection minimizes residual noise.
-10dB Pad
The Stereo VideoMic features a -10dB Pad switch for enhanced headroom and minimal distortion.
Camera and Boom Pole Mountable
The versatile shoe mount allow the microphone to be mounted to camcorders, stands or boom poles.
Integrated Shock-Mount
The Stereo VideoMic features a permanently attached shock mount with a camera mounting shoe underneath. The shock mount features replaceable rubber o-rings that protect against noise caused by abrupt movement and shock.
High Pass Filter Switch
A high-pass filter switch eliminates room ambiance and noise below 80Hz. This results in improved intelligibility while recording around machinery, wind or close proximity.
Internal Power
The condenser element is powered with a standard 9-volt battery.
Transducer Condenser
Polar Pattern Supercardioid
Frequency Response 40Hz – 20kHz Selectable HPF @ 80Hz / 12dB /octave
Dynamic Range (Typical) 115dB (per IEC651)
Signal-to-Noise Ratio 79dB (A-weighted per IEC651)
Maximum Input Sound Level 130dB (@ 1kHz. 1% THD into 1 ohm load)
Power Requirements 9 Volt DC Alkaline
Output Impedance 200 ohms
Output Connectors Stereo mini-jack – 1/8″ (3.5mm)
Right Channel – Ring
Pad -10dB
Low-Frequency Roll-Off 80Hz / 12dB octave
Dimensions 6.85 x 3.93 x 2.51″ (172 x 100 x 64mm) (Length x Height x Diameter)
Weight 11.64 oz (330g)

Also available to purchase with a durable neoprene pouch for the VideoMic

Wilcox Sound is an authorized RØDE Microphones dealer

Additional information

Weight 1.10 lbs
With Pouch

Yes, No

You may also like…